Home » Products » Wheel Loader with Yuchai Engine

Wheel Loader with Yuchai Engine


This W136 wheel loader is kind of heavy equipment widely used in mining and construction, and it’s designed with a Yuchai engine and the engine is an anti-oil geared starter motor with large-flow PU air filter, thereby safe to use and easy to maintain.

The rated payload of this front loader is 3tons and the bucket capacity can be 1.8m3or2.2m3. The improved hydraulic response of this loading machine gives the operator better feel and control of the bucket, and the spacious and comfortable cab allows for productive and fatigue-free operation. Also, the cab is equipped with an air conditioner, shock-absorbing seat with safety belt, radio and speaker. Moreover, this loader consumes1.67L/hour less fuel when compared with the similar loading equipment.

1. Engine: famous China-brand Yuchai YC6B125-T20:


Type: YC6B125-T20

Description: Direct injection, water cooling, 4 strokes.

Output power: 92KW

Rotating speed: 22000rpm

Max power: 500N.m

Minimum fuel consumption: ≤210g/kW·h

Machine fuel consumption ratio: ≤0.4%

Features: a. FEV necking combustion technique pump

b. Low inertia small-bore injector gives better combustion, thereby increasing low-speed torque.

c. Internationally-used anti-oil geared starter engine, quick to start, reliable to operate.

d. Large flow PU filter, safe to use and easy to maintain.

2. Gearbox:


The ZL30 planetary gearbox is designed with a single-stage hydraulic torque converter and has 2 front and 1 rear speeds. The hydraulic power delivers smooth and reliable shift to the gearbox. The maximum permissible temperature is 120℃. This transmission system delivers strong power, reliable operation and low-cost maintenance.

3. Meritor-made drive axle:

The Meritor-made drive axle features reliability and extended working life. Its front axle is rigidly mounted to bear internal torque load as well as to support the front loader. And the rear axle can help to avoid oscillating, thus making the wheel loader stable on the roughest terrain. A spiral bevel gear with differential is applied for its main reducer, and the hub reducer is equipped with planetary gear. As a dry caliper brake, the air over oil active brake is easy to maintain better for radiating.

4. Hydraulic parts:


Best quality hydraulic pumps, multi-way valves, cylinders, joints, seals and hoses are built into our wheel loader equipped with Yuchai engine. The hydraulic system provides reliable and productive operation, lower oil temperature and better hydraulic pressure assignment. Before shipment, we have strictly tested the wheel loader in oil leak, oil temperature, operation and power.

5. Control lever:

The control lever, also known as operating lever or operating rod, of the wheel loader with Yuchai engine, is standard. One lever is utilized to control the boom lifting up and down, and the other is to control the tilt and dump of the bucket.

6. Joystick:

A Pilot single-lever joystick is optional, to enhance productivity, and the joystick is movable in four different directions to control the boom and bucket.

Features of this Front Loader powered by Yuchai Engine:

1. Comfortable Driving Environment:


(1). Ergonomic controls are fully adjustable and designed for low-effort comfort. Switches and controls for different systems are installed within easy reach of the operator.

(2). All-around visibility in the cab allows for improved jobsite safety and increased view.

(3). The spacious cab provides more comfort for operators, which leads to more productivity all day long.

(4). The internal operation console is front-located, and the seat is adjustable from front to back, to provide comfortable operation.

(5). Air conditioner is optional for the cab, and the cab is designed with radio and USB connector.

(6). The290mmdistance between the cab and rear frame surface facilitate the maintenance of pipes and steering.

(7). The wheelbase is extended up to2750mm; axle load distribution is reasonable. So this wheel loader features good reliability and stability.

Resource allocation of W136 with air conditioner:

Bucket capacity(CBM) 1.8 or 2.2
Rated load(kg) 3200
Max.Breakout Force(KN) 100±5
Max.Traction(KN) 97±5
Forward Speed 1(KM/H) 0-10.8
Forward Speed 2(km/h) 0-32.5
Reverse Speed(km/h) 0-14.5
Max Dump (mm) 3060±50
Max.Dump Reach(mm) 1020±50
Min.Turning radius(mm) 6005±50
Min .Clearance Over Ground(mm) 360±20
Wheel Base(mm) 2750±30
Tread (mm) 1800±10
Total Hydraulic Cycle Time(s) ≦10.3
Full Bucket Lifting Time(s) ≦5.6
Overall Dimensions(mm) L:6950×W:2245×H:3228
Operating Weight(kg) 10000±100
Diesel Engine
Brand Yuchai YC6B125-T20
Type Direct injection ,water cooling ,4strokes
Rated Output(kw) 97
Rated Speed(rpm) 2200
Max.Torque(N.m) 500
Type Planetary
Rated Input Speed(rpm) 2200
Transaxle And Tire
Rear Axle Oscillation Center oscillation
Oscillating Angle Of  Rear Axle(°) 12
Pressure Of Tire(Mpa) 0/28-0.32
Working Hydraulic System
Working Pump Type Gear pump
Working Pressure(Mpa) 16
Lifting Cylinder Bore ×Stroke(mm) 125×816
Tilting Cylinder Bore×Stroke(mm) 140×553
Steering System
Steering Pump Type CBY2050
Working Pressure(Mpa) 10
Steering Cylinder Bore×Stroke(mm) 80×340
Max.Steering Angle(°) 36

Optional Parts:


(1)2.2 m3coal bucketParts      |      (2) Rock bucket      |      (3) Log grapple      |      (4) Pallet fork      |      (5) Joystick